| Features | Benefits |
| 914mm (36)” bottom blade capacity. | Can accommodate the vast majority of fine turf bottom blades. |
| Grinds both front & top face of the bottom blade. | Bottom blade returned to original manufacturers specification. |
| Portable angle finder. | Ensures bottom blades are returned to manufacturers relief angles. |
| Automatic traverse. | Allows passes of grinding wheel for polished finish. |
| Cast bed construction | Reduces vibration and increases accuracy |
| Liquid coolant on all operations | Reduces air borne dust therefore no need for extractor fans. Stops heat build up and distortion. |
| 240 volt power supply | Can be readily plugged into normal 13-amp power supply. |
| Linear bed rails with self-adjusting bearings. |
Accurate & smooth traverse of the grinding wheel carriage to within
0.05 mm or 2 Thou. over the width of the machine. |
| Anti splash guards. | Contains any splash from coolant within the confines of the machine. |
| 2 emergency stop buttons. | One on the control panel and one at knee height at the opposite end to disable the machine should the need occur. |
| Full installation & training. | Ensures operators are fully conversant with all grinding aspects connected with the machine and will be provided with a certificate of competence. |
